News
The IMMOPARK ZILINA represents a modern distribution centre offering premises suitable for logistics, distribution, warehousing and light production with office spaces, located on 40 ha land between the international airport and D1 highway.
About
Žilina is the forth largest city of Slovakia with a population of almost 90,000. The largest foreign investor in the region is the Kia Motors plant.
The project offers more than 150,000 sqm logistic and industrial buildings in 3 zones. The halls were designed to provide maximum efficiency to any tenant and may be adapted to special requirements.
| Hall | Acreage | Condition |
|---|---|---|
| DPD | 2 528 m² | current |
| Z1 | 11 232 m² | planned |
| Z2 | 12 125 m² | planned |
| Z2a | 9 136 m² | in process |
| Z4 | 3 456 m² | planned |
| Z5 | 23 744 m² | planned |
| Z6 | 15 552 m² | planned |
| Z7 | 14 688 m² | planned |
| Z8 | 19 260 m² | planned |
| Z9 | 5 184 m² | planned |
| Z10 | 5 760 m² | planned |
| Z11 | 9 504 m² | planned |
| Z12 | 6 912 m² | planned |
Technical Specifications
Standard Technical Specification
HALL + IN-BUILT AREA:
Basis solution
Basic grid
12 x 24 m for main Hall area, (Columns in spacing from 3,0 m)
Clear height
Min. 7,0 m Flexi space and 10,0 m for Hall objects; min. 2,8 m for in-built offices
Floor load capacity
5 t/m2 for main Hall objects; 150×150 mm – vertical load 55 kN
400 kg/m2 for in-built offices
Shell construction
Foundation
Caps footing (+ Deep foundation – concrete bored piles, in accordance with Geological surveys)
Load bearing system
Pre-cast frame from steel – reinforced concrete, (Alt. Steel structures) *, columns in modular system 12 × 24 m, on building perimeter each 6 m
Non-load bearing system
Gas concrete – Brickworks for the office inbuilds
Fire-resistant dividing wall panels (Alt. Gas concrete – Brickworks in the Hall)
Plasterboard partitions and suspended ceiling from cassettes only for in-built offices
Insulation
Against soil humidity PE Foil, min. 0,1 mm thickness,
+ Radon insulation necessity in accordance with STN regulations
Floors
Wired concrete floor with steel fibre reinforcement, thickness approx. 180 mm, smooth finishing of the concrete floor
Facade
Facade sandwich panels, PUR or mineral wool insulation, horizontal cladding (Panel thickness 160 mm)
Roof composition
Trapezoidal corrugated metal sheet, steam proof insulation, thermal insulation (approx. 180 mm of mineral wool), PVC foil 1,5 mm thickness
Facade openings
Windows – 5 chamber plastic profile system + Insulation Glass (a=1,4/1,4 m), including support load-bearing structures (for in-built areas)
External door – 5 chamber plastic profile system + Insulation filling (a=2,0/0,9 m), including support load-bearing structures (for main Hall object)
Interior veneered door (a=2,0/0,8 m), including door casing (for in-built areas)
Industrial sectional manual gates, size 3,0 x 3,0 m, insulated by PUR 40 mm (a=3,0/3,0 m) with hydraulic dock levelers (length 2,5m, width 2m, dynamic load bearing capacity 6000 kg), in number approx. 1 Pcs./1000 m2 for warehouse area
Drive-in sectional gates for direct access, size 4 x 4,5m, manual
Technical objects - equipments
Heating and ventilation
Gas heating in warehouse/production, wall or under roof hang units (type Sahara or similar), min. heat temperature is 15ºC
Warehouse ventilation over the heating units
Radiators for In-built office area, with “under surface” piping, Min. heat temperate is 18 – 21ºC,
Separate ventilation in social areas
Air-conditioning
Local air-condition units + “under surface” piping only for In-built office area, (alt.- central unit + air-handling + “under surface” piping for bigger office premises)
Roof rain water drainage
Under pressure PVC system, „on surface“ piping, heated inlets, (in In-built office area with “under surface” piping)
Water, sewage
PVC „on surface“ piping, Sanitary installations– slightly bellow average standard (In-built office area with “under surface” piping)
Fire protection
Fire flaps and fire transmissions
Designed according to STN/EU regulations
Hydrants
Designed according to STN/EU regulations
Fire extinguishers
Designed according to STN/EU regulations
Designed according to STN/EU regulations
Roof heat and smoke domes (Roof lights), Designed according to STN/EU regulations incl. pneumatic installation if necessary
Fire alarm system
According to STN/EU regulations
Sprinkler system
Full ESFR sprinkler system in warehouse/production if necessary, designed according to STN/EU regulations
Escape lights
Designed according to STN/EU regulations
Fire radio
Designed according to STN/EU regulations
Electrical
Cabling
On surface cabling in warehouse/production, under surface in In-built office area
Switchboard room
In accordance to STN regulations for appropriate capacity value
Sockets circuits
1 Box = 2x220V + 2x380V with circuit breaker for 24A, in number 1 Box/1000 m2 for warehouse/production space
Under window sill board PVC cable channel, sockets 4x220V + 2x Data/Telephone for 1 working place (15 m2) only in In-built office area
Forklifts recharging
Under window sill board PVC cable channel, sockets 4x220V + 2x Data/Telephone for 1 working place (15 m2) only in In-built office area
Illumination
Under window sill board PVC cable channel, sockets 4x220V + 2x Data/Telephone for 1 working place (15 m2) only in In-built office area
Under window sill board PVC cable channel, sockets 4x220V + 2x Data/Telephone for 1 working place (15 m2) only in In-built office area
Lightning and ground connection
In accordance to STN regulations
Paved areas and roads
Footpaths
Concrete pavement surface in sand bedding, + curbstones
Personal cars parking
Concrete pavement surface in sand bedding, + road curbs
Roads and rest paved areas
Concrete pavement surface in sand bedding, + road curbs
Road drainage system through oil traps – connection on public sewage
Green area
Levelling + grass
Fencing
Wire fence, fencing on yard, height approx. 1,8m, zinc- coated access gates
External illumination
In accordance to STN regulations, (5 – 25 lx – illumination level)
Tenants
Contacts
Igor Šnirc
Letting manager
+421 918 138 000
snirc@immopark.sk
Marian Kováčik
Project manager
+421 907 979 560
marian.kovacik@immorent.com
Erste Group Immorent Slovensko s. r. o.
Sídlo: Tomášikova 48, 832 52 Bratislava, Slovensko
IČO: 35734507, DIČ: 2020269339
Tel: +421 248 629 911
Email: office.sk@immorent.com
Peter Malík, jednatel
Jaroslav Adolf, jednatel
Marián Kováčik, project manager
Vytvořeno v Idealabu.