News

The IMMOPARK Košice project represents a modern industrial park with premises suitable for logistics, distribution and light industry, with office spaces available.

About

The IMMOPARK Košice project represents a modern industrial park with premises suitable for logistics, distribution and light industry, with office spaces available.

It is situated on a 60-hectare land between an international airport and the first-class Košice – Bratislava road. IMMOPARK Košice offers more than 250,000 m2 of logistic, industrial and office premises.
The sizes of individual parts are flexible and available from 1,100 m2. All the halls have been designed to offer the maximum efficiency to any tenant and may also be adapted to specific requirements.

Immopark Košice - Map

Hall Acreage Condition
FS8 9 959 m² current
L5 14 585 m² current
L6 15 336 m² current
FS7 14 893 m² current
DPD 1 456 m² current
FS1 7 344 m² planned
FS2 18 144 m² planned
FS3 - planned
L1a 8 400 m² planned
L1b 13 704 m² planned
L2 31 104 m² planned
L3 31 104 m² planned
L4 23 328 m² planned

Globální mapa - Immopark Košice

Technical Specifications

Standard Technical Specification
HALL + IN-BUILT AREA:


Basis solution

Basic grid

12 x 24 m for main Hall area, (Columns in spacing from 3,0 m)

Clear height

Min. 7,0 m Flexi space and 10,0 m for Hall objects; min. 2,8 m for in-built offices

Floor load capacity

5 t/m2 for main Hall objects; 150×150 mm – vertical load 55 kN

400 kg/m2 for in-built offices

Shell construction

Foundation

Caps footing (+ Deep foundation – concrete bored piles, in accordance with Geological surveys)

Load bearing system

Pre-cast frame from steel – reinforced concrete, (Alt. Steel structures) *, columns in modular system 12 × 24 m, on building perimeter each 6 m

Non-load bearing system

Gas concrete – Brickworks for the office inbuilds

Fire-resistant dividing wall panels (Alt. Gas concrete – Brickworks in the Hall)

Plasterboard partitions and suspended ceiling from cassettes only for in-built offices

Insulation

Against soil humidity PE Foil, min. 0,1 mm thickness,

+ Radon insulation necessity in accordance with STN regulations

Floors

Wired concrete floor with steel fibre reinforcement, thickness approx. 180 mm,  smooth finishing of the concrete floor

Facade

Facade sandwich panels, PUR or mineral wool insulation, horizontal cladding (Panel thickness 160 mm)

Roof composition

Trapezoidal corrugated metal sheet, steam proof insulation, thermal insulation (approx. 180 mm of mineral wool), PVC foil 1,5 mm thickness

Facade openings

Windows – 5 chamber plastic profile system + Insulation Glass (a=1,4/1,4 m), including support load-bearing structures (for in-built areas)

External door – 5 chamber plastic profile system + Insulation filling (a=2,0/0,9 m), including support load-bearing structures (for main Hall object)

Interior veneered door (a=2,0/0,8 m), including door casing (for in-built areas)

Industrial sectional manual gates, size 3,0 x 3,0 m, insulated by PUR 40 mm (a=3,0/3,0 m) with hydraulic dock levelers (length 2,5m, width 2m, dynamic load bearing capacity 6000 kg), in number approx. 1 Pcs./1000 m2 for warehouse area

Drive-in sectional gates for direct access, size 4 x 4,5m, manual

Technical Solutions - Košice - Image

Technical objects - equipments

Heating and ventilation

Gas heating in warehouse/production, wall or under roof hang units (type Sahara or similar), min. heat temperature is 15ºC

Warehouse ventilation over the heating units

Radiators for In-built office area, with “under surface” piping, Min. heat temperate is 18 – 21ºC,

Separate ventilation in social areas

Air-conditioning

Local air-condition units + “under surface” piping only for In-built office area, (alt.- central unit + air-handling + “under surface” piping for bigger office premises)

Roof rain water drainage

Under pressure PVC system, „on surface“ piping, heated inlets, (in In-built office area with “under surface” piping)

Water, sewage

PVC „on surface“ piping, Sanitary installations– slightly bellow average standard (In-built office area with “under surface” piping)

Fire protection

Fire flaps and fire transmissions

Designed according to STN/EU regulations

Hydrants

Designed according to STN/EU regulations

Fire extinguishers

Designed according to STN/EU regulations

Designed according to STN/EU regulations

Roof heat and smoke domes (Roof lights), Designed according to STN/EU regulations  incl. pneumatic installation if necessary

Fire alarm system

According to STN/EU regulations

Sprinkler system

Full ESFR sprinkler system in warehouse/production if necessary, designed according to STN/EU regulations

Escape lights

Designed according to STN/EU regulations

Fire radio

Designed according to STN/EU regulations

Electrical

Cabling

On surface cabling in warehouse/production, under surface in In-built office area

Switchboard room

In accordance to STN regulations for appropriate capacity value

Sockets circuits

1 Box = 2x220V + 2x380V with circuit breaker for 24A, in number 1 Box/1000 m2  for warehouse/production space

Under window sill board PVC cable channel, sockets 4x220V + 2x Data/Telephone for 1 working place (15 m2) only in In-built office area

Forklifts recharging

Under window sill board PVC cable channel, sockets 4x220V + 2x Data/Telephone for 1 working place (15 m2) only in In-built office area

Illumination

Under window sill board PVC cable channel, sockets 4x220V + 2x Data/Telephone for 1 working place (15 m2) only in In-built office area

Under window sill board PVC cable channel, sockets 4x220V + 2x Data/Telephone for 1 working place (15 m2) only in In-built office area

Lightning and ground connection

In accordance to STN regulations

Paved areas and roads

Footpaths

Concrete pavement surface in sand bedding, + curbstones

Personal cars parking

Concrete pavement surface in sand bedding, + road curbs

Roads and rest paved areas

Concrete pavement surface in sand bedding, + road curbs

Road drainage system through oil traps – connection on public sewage

Green area

Levelling + grass

Fencing

Wire fence, fencing on yard, height approx. 1,8m, zinc- coated access gates

External illumination

In accordance to STN regulations, (5 – 25 lx – illumination level)

Tenants - Immopark Košice

Tenants


Contacts


Igor Šnirc
Letting manager
+421 918 138 000
snirc@immopark.sk

Marian Kováčik
Project manager
+421 907 979 560
marian.kovacik@immorent.com

 

Erste Group Immorent Slovensko s. r. o.

Sídlo: Tomášikova 48, 832 52 Bratislava, Slovensko

IČO: 35734507, DIČ: 2020269339

 

Tel: +421 248 629 911
Email: office.sk@immorent.com

Peter Malík, jednatel
Jaroslav Adolf, jednatel
Marián Kováčik, project manager

Vytvořeno v Idealabu.